5 fault records for this panel, each labelled with its review status and, where one is cited, the source document it comes from. Fike CIE-A-400 one- or two-loop addressable fire alarm control panel. This panel identity is limited to CIE-A-400 documentation and is not interchangeable with CIE-A-200, Duonet, Cheetah or TWINFLEX generations.
5 records
Device quantity mismatch
The number of devices found during CIE-A-400 loop initialisation does not match the number programmed in the approved OSP configuration.
Earth fault
The CIE-A-400 has detected a short or leakage path between earth or screen and either 0 V or a positive circuit conductor.
Loop open circuit
The CIE-A-400 has recorded an intermittent or recurrent open-circuit condition on an addressable loop.
Loop negative-core open circuit
The CIE-A-400 has identified an open circuit on the negative core of the indicated loop during initialisation.
Smoke sensor failed - signal high
The CIE-A-400 has received an abnormally high smoke-sensor signal from the identified Sita detector.
One question, answered from the fault records above. If they don't cover it, we'll say so. Sign up free for 5 questions a day across every panel.
Records marked “sourced — not yet independently verified” carry a real citation but have not yet completed formal review. Always confirm against the manufacturer's current documentation before acting on site.
Search fault records by panel, each showing its review status and the source document where one is cited, and ask the assistant when a message is not listed. A free account needs no card and includes 5 assistant questions and 20 fault searches a day.