Zeta Simpo fault records

Open circuit at Alarm Confirmation input

Circuit broken at input 'Alarm Confirmation'.

Short circuit at Alarm Confirmation input

Short circuit detected at input 'Alarm Confirmation'.

Battery internal resistance too high

High value (Ri>0.3Ω) of the battery internal resistance. Replace the battery immediately.

Standby battery missing

The accumulator battery is missing.

Standby battery discharged

The accumulator battery is discharged.

Fault in the detector

Fault in the detector.

Charging unit failed

The charging unit is failed.

Dirty detector chamber

Dirty detector chamber.

More than one device sharing a loop address

More than one device with the same address in the loop.

Duplicate panel number on the network

Doubling of the panel number, when two or more panels are connected in a network.

Resistive connection to earth

Resistive connection between some signals and earth, below 10kΩ.

SIMPO: EXT Output Open

Event message on the SIMPO addressable panel. The manual's Appendix A table describes it as: Circuit broken at Extinguishing output. The manual gives no cause or action for this message.

Short circuit at Extinguishing output

Short circuit detected at Extinguishing output.

SIMPO: Fault Output Open

Event message on the SIMPO addressable panel. The manual's Appendix A table describes it as: Circuit broken at Fault output. The manual gives no cause or action for this message.

Short circuit at Fault output

Short circuit detected at Fault output.

Open circuit at Protection Panel Fault input

Circuit broken at input 'Protection Panel Fault'.

Short circuit at Protection Panel Fault input

Short circuit detected at input 'Protection Panel Fault'.

SIMPO: Fire Output Open

Event message on the SIMPO addressable panel. The manual's Appendix A table describes it as: Circuit broken at Fire output. The manual gives no cause or action for this message.

Short circuit at Fire output

Short circuit detected at Fire output.

FLASH memory error detected

FLASH Memory error is detected.

Event log file lost or damaged

The log file event is lost or damaged.

Loop wiring broken

The loop is broken.

Loop device not responding

The device does not respond (lost or damaged).

Fault in a loop device input

Fault in loop device input.

Fault in a loop device output

Fault in loop device output.

Unexpected device type detected at address

A different than the expected type of device has been detected at the address.

Short circuit detected in the loop

Short circuit detected in the loop.

Device with no address number applied

There is a device without an address number (a device with address 0 is applied).

SIMPO: New Loop Devices Found

Event message on the SIMPO addressable panel. The manual's Appendix A table describes it as: New loop devices are found in system configuration. The manual gives no cause or action for this message.

SIMPO: New Periphery Devices Found

Event message on the SIMPO addressable panel. The manual's Appendix A table describes it as: New periphery devices are found in the system configuration. The manual gives no cause or action for this message.

Fault in the connection with another networked panel

Fault in the connection with another panel, when two or more panels are connected in a network.

Peripheral device not responding

The device is not responding (the device is lost or failed).

Wrong peripheral device type at address

A periphery device with different type is found on the address.

Open circuit at Protection Alarm Confirmation input

Circuit broken at input 'Protection Alarm Confirmation'.

Short circuit at Protection Alarm Confirmation input

Short circuit detected at input 'Protection Alarm Confirmation'.

Extinguishing panel failure

The extinguishing panel failure.

RAM memory error detected

RAM Memory error is detected.

Open circuit at Sounder 1 output

Circuit broken at Sounder 1 output.

Short circuit at Sounder 1 output

Short circuit detected at Sounder 1 output.

Open circuit at Sounder 2 output

Circuit broken at Sounder 2 output.

Short circuit at Sounder 2 output

Short circuit detected at Sounder 2 output.