Networking ProductSource-checked
AFP711 XFP Network Driver Card
Optional RS485 network driver card for XFP one/two-loop 32-zone panels; supplied in XFP repeaters.
C-TEC
Official sources checkedFire alarm and life safety equipment covered through C-TEC's official support documentation.
- Reviewed products
- 41
- Panel records
- 6
- Verified faults
- 53
- Reviewed parts
- 0
Official resource links last checked July 29, 2026.
Manufacturer overview
Documented engineering coverage
Incognito records the manufacturer identity, official resources and supported product families shown on this page. Coverage confirms catalogue evidence only. It does not imply manufacturer approval, product compatibility or access to restricted support.
- Product categories
- Fire detection, Voice alarm
- Typical engineering use
- Addressable panels, conventional panels, manufacturer support documentation
- Known names
- C-TEC, C TEC
Common engineer searches
Continue in engineering search
Products supported by Incognito
Documented product families
Lifecycle labels are shown only when a current official page or manufacturer lifecycle notice supports the classification. All other product names remain unclassified.
Current products
Also found as XFP CAST
Also found as ZFP CAST
Also found as C TEC CAST, CTEC CAST
Also found as CFP conventional
Source reviewed technical data
Structured product records
These records expose only supported specifications and retain missing values rather than filling them by assumption.
Networking ProductSource-checked
BF356 ZFP Fibre Optic Transceiver
ZFP RS485-to-duplex multimode fibre transceiver for documented Hi-Net fibre links.
Power SupplySource-checked
BF360-24
External EN 54-4 power supply identified by C-TEC as a suitable supply example for the ZFP Compact Controller.
Power SupplySource-checked
BF560-12 Boxed Power Supply
Boxed 12 V, 2 A C-TEC power supply documented as the required supply for BF356 fibre transceivers.
Detection DeviceSource-checked
CA402 CAST Programmable Heat Detector
Programmable CAST heat detector with onboard short-circuit isolator for XFP and ZFP CAST panels.
AccessorySource-checked
CA408 CAST Detector Base
Detector base for compatible CAST and CAST-PRO detectors, with remote-indicator terminals, locking mechanism and identification tag.
Detection DeviceSource-checked
CA414 CAST Programmable Multi-Sensor
Programmable CAST smoke-and-heat multi-sensor with five documented operating modes and onboard isolator.
Detection DeviceSource-checked
CA416 CAST Optical Smoke Detector
CAST optical smoke detector with onboard short-circuit isolator for XFP and ZFP CAST panels.
Call PointSource-checked
CA470 CAST Red Manual Call Point
Universal surface- or flush-mount red CAST manual call point with resettable element and onboard isolator.
Call PointSource-checked
CA47067 CAST IP67 Red Manual Call Point
IP67 surface-mount red CAST manual call point with onboard short-circuit isolator.
SoftwareSource-checked
CA507 XFP CAST/Apollo Programming Tools
Programming kit for C-TEC XFP CAST and Apollo protocol panels; XFP507 is the separate Hochiki ESP kit.
Io ModuleSource-checked
CA730 CAST Input Output Module
CAST input/output module combining switch-monitor, zone-monitor and relay-output functions with onboard isolator.
Io ModuleSource-checked
CA731 CAST Mains Switching Input Output Module
CAST mains-switching input/output module with onboard loop isolator.
InterfaceSource-checked
CA732 CAST Zone Monitor Module
Single-zone CAST conventional-zone monitor with onboard short-circuit isolator.
Io ModuleSource-checked
CA734 CAST Mini I/O Unit
Miniature CAST I/O unit with monitored input, relay output and onboard isolator.
InterfaceSource-checked
CA738 CAST Sounder Control Module
CAST interface providing one monitored circuit for conventional sounders or VADs.
InterfaceSource-checked
CA739 CAST 4-8 Way Sounder Controller
Four-circuit CAST sounder controller expandable to eight circuits, documented only for ZFP CAST panels.
InterfaceSource-checked
CA740 4-Way Conventional Zone to CAST Converter
Converter for migrating conventional detection branches to a CAST addressable system.
InterfaceSource-checked
CA742 CAST Loop Resistance Tester
End-B loop resistance tester documented only for ZFP CAST systems.
AccessorySource-checked
CAPROG CAST Handheld Device Programmer
Battery-powered handheld programmer and tester for assigning user IDs to CAST field devices and checking device response.
Detection DeviceSource-checked
CP402 CAST-PRO Heat Detector
CAST-PRO heat detector with documented A1R and A2 modes and onboard short-circuit isolator.
Detection DeviceSource-checked
CP411 CAST-PRO CO Smoke and Heat Multi-Sensor
CAST-PRO carbon-monoxide, smoke and heat multi-sensor with onboard short-circuit isolator.
Detection DeviceSource-checked
CP414 CAST-PRO Smoke and Heat Multi-Sensor
CAST-PRO smoke-and-heat multi-sensor with eight documented operating modes and onboard isolator.
Detection DeviceSource-checked
CP416 CAST-PRO Smoke Detector
CAST-PRO smoke detector with two documented sensitivity modes and onboard short-circuit isolator.
Detection DeviceSource-checked
CPDUCT/OPT CAST-PRO Duct Detector
CAST-PRO duct detector supplied with CP416 smoke detector and CA408 base for XFP and ZFP CAST systems.
Control PanelSource-checked
XFP 1/2 Loop 32 Zone
One- or two-loop, 32-zone XFP addressable fire alarm control panel.
Control PanelSource-checked
XFP Single Loop 16 Zone
Single-loop, 16-zone XFP addressable fire alarm control panel.
Control PanelSource-checked
XFP502/CA
Two-loop, 32-zone XFP control panel using C-TEC CAST detection protocol.
Repeater PanelSource-checked
XFP510-16
Sixteen-zone XFP repeater supporting a network of up to eight panels or repeaters.
Networking ProductSource-checked
XFP761 XFP Network Driver Card
Network driver card documented for XFP single-loop 16-zone panels.
Loop CardSource-checked
Z02LOOP/CA ZFP CAST Two-Loop Expansion PCB
Two-loop CAST expansion PCB providing loops 3 and 4 for compatible two-loop-main-PCB ZFP CAST panels.
Io ModuleSource-checked
Z11 ZFP 4-Way Relay PCB
Four-way ZFP A-BUS relay PCB.
Io ModuleSource-checked
Z12 ZFP 8-Way Relay PCB
Eight-way ZFP A-BUS relay PCB.
Io ModuleSource-checked
Z13 ZFP 8-Way Input Output PCB
Eight-channel ZFP A-BUS monitored-input/open-collector-output PCB.
Io ModuleSource-checked
Z14 ZFP 16-Way Input Output PCB
Sixteen-channel ZFP A-BUS monitored-input/open-collector-output PCB.
Io ModuleSource-checked
Z15 ZFP 4-Way Conventional Sounder PCB
Four-circuit ZFP A-BUS conventional-sounder PCB requiring an external EN 54-4 power supply.
Io ModuleSource-checked
Z16 ZFP 4-Zone 2-Sounder PCB
ZFP A-BUS PCB with four conventional detection zones and two conventional sounder circuits.
Control PanelSource-checked
ZFP CAST Standard Cabinet Panel
Touchscreen-controlled C-TEC CAST addressable fire panel in the standard cabinet format.
Networking ProductSource-checked
ZHN ZFP Hi-Net Network PCB
Multi-path fault-tolerant ZFP Hi-Net network PCB.
Repeater PanelSource-checked
ZREP1S/CA ZFP Compact Controller
Surface-mount compact ZFP CAST controller for connection to a ZFP Hi-Net network.
SoftwareSource-checked
ZTOOLS ZFP Programming Tools
C-TEC toolkit for programming and configuring supported ZFP fire panels.
Direct from the manufacturer
Official resources
Each record includes an original Incognito summary before the external link. Incognito does not host or mirror the linked material.
Product catalogueOfficialLink checked
CAST addressable fire alarm system
Published by C-TEC • CAST
Incognito summary
Use this official C-TEC resource as the primary starting point for CAST. It is most useful for products information and should be checked against the exact installed model, document revision and site configuration.
- Useful for
- checking current product information, variants and manufacturer supplied downloads for CAST
- Intended audience
- design, installation, commissioning and maintenance engineers
- Product range covered
- CAST
- Companion knowledge
- ArticleFault recordsFAQsTroubleshooting
Checked Oct 30, 2026Open official resource
Product catalogueOfficialLink checked
CFP conventional fire panels
Published by C-TEC • CFP
Incognito summary
Use this official C-TEC resource as the primary starting point for CFP. It is most useful for products information and should be checked against the exact installed model, document revision and site configuration.
- Useful for
- checking current product information, variants and manufacturer supplied downloads for CFP
- Intended audience
- design, installation, commissioning and maintenance engineers
- Product range covered
- CFP
- Companion knowledge
- ArticleFault recordsFAQsTroubleshooting
Checked Oct 30, 2026Open official resource
Product catalogueOfficialLink checked
XFP CAST addressable fire panel
Published by C-TEC • XFP
Incognito summary
Use this official C-TEC resource as the primary starting point for XFP. It is most useful for products information and should be checked against the exact installed model, document revision and site configuration.
- Useful for
- checking current product information, variants and manufacturer supplied downloads for XFP
- Intended audience
- design, installation, commissioning and maintenance engineers
- Product range covered
- XFP
- Companion knowledge
- ArticleFault recordsFAQsTroubleshooting
Checked Oct 30, 2026Open official resource
Product catalogueOfficialLink checked
ZFP CAST addressable fire panel
Published by C-TEC • ZFP
Incognito summary
Use this official C-TEC resource as the primary starting point for ZFP. It is most useful for products information and should be checked against the exact installed model, document revision and site configuration.
- Useful for
- checking current product information, variants and manufacturer supplied downloads for ZFP
- Intended audience
- design, installation, commissioning and maintenance engineers
- Product range covered
- ZFP
- Companion knowledge
- ArticleFault recordsFAQsTroubleshooting
Checked Oct 30, 2026Open official resource
Documentation, videos and downloads remain the property of their respective manufacturers.
Incognito technical guidance
Related articles and guides
Source reviewed records
Related fault records
C-TEC ZFP12 sourced fault recordsC-TEC XFP9 sourced fault recordsCFP (2/4/8 Zone Standard Conventional)10 sourced fault recordsCFP AlarmSense (2/4/8 Zone)10 sourced fault recordsMFP Range (4-28 Zone) Conventional Fire Alarm Panel5 sourced fault recordsFP Range (2-14 Zone) Conventional Fire Alarm Panel3 sourced fault records
MFP Range (4-28 Zone) Conventional Fire Alarm Panel • Battery/Power Supply FaultPermanent Battery/Power Supply FaultCheck: (1) the MAINS ON light is illuminated — if not, check the mains supply and fuse next to the transformer; (2) the battery leads are connected the correct way round (reversed leads blow the battery fuse F5 and can cause a permanent, non-resettable power fault); (3) two 12V batteries of the correct size are connected in series; (4) the wiring loom is properly seated on PL4; (5) the transformer leads are properly connected. If the fault persists with the mains light lit, the batteries may be heavily discharged or have failed — try a known-good, fully charged pair.C-TEC XFP • Device missingDevice missing from loopLoop learn cannot find a device expected by the stored configuration.C-TEC ZFP • Displaying and clearing fault conditionsZFP: Displaying and clearing fault conditionsPer the manual, when a fault occurs one or more Fault indicators flash yellow, the internal buzzer sounds (if enabled) and the fault button on the touchscreen changes from blue to yellow with the number of faults shown. Pressing it shows the fault type and location; pressing the fault display shows more detail: for device-specific faults the loop number and address. The designated responsible person may silence the internal buzzer (new faults resound it), take steps to have the fault rectified, and note it in the log book. Once faults have been cleared the panel should auto-reset and return to normal; pressing Reset while faults are still present will not clear them, and they will simply re-appear.C-TEC XFP • Double addressDouble address detectedLoop learn has found more than one device using the same address.C-TEC ZFP • DOUBLE ADDRESSDuplicate CAST device addressThe ZFP reports DOUBLE ADDRESS when more than one CAST device uses the same loop address.C-TEC ZFP • Earth faultZFP earth faultThe ZFP earth-fault monitoring circuitry has detected an abnormal system connection to earth.
Engineer questions
Related FAQs
No FAQ for this manufacturer has completed source review. Search remains available without presenting unreviewed answers as verified guidance.
Technical guidance boundary
Use the exact current manufacturer document for the installed model and revision. Confirm the site configuration, cause and effect, fire strategy, applicable standards and safe isolation procedure before taking action. Incognito does not claim manufacturer endorsement or guarantee a diagnosis.
One connected engineering library
The live technical database contains 30 supported manufacturers, 96 panel records and 186 reviewed product records.
Other manufacturer hubs
AdvancedApollo Fire DetectorsASL Fire & SecurityBaldwin BoxallBoschEatonEMSESSER by HoneywellFikeFireClassGent by HoneywellGlobal Fire EquipmentHaes SystemsHochiki EuropeHoneywell SecurityKentec ElectronicsMorley-IASNittan EuropeNotifier by HoneywellPaxtonProtecPyronixSiemensSimplexTexecomXtralisZeta Alarm SystemsZiton