Fault codes by panel
Search fault records across 49 panels. Each record is labelled with its review status and, where one is cited, the source document and page it comes from.
Searches 608 records across 49 panels — 573 of them source-verified. Signed in, your dashboard fault search covers only the fully source-verified records, on any plan.
Want to test yourself? Try the free daily fault challenge.
8 matches for “6100”
Protec 6100
Aux. Supply Fault (24 V output)
The manual says a fault has been detected with the auxiliary 24 V supply output of the 6100. There may no longer be an auxiliary supply to external devices, or the auxiliary devices are drawing too much current. The…
View on the Protec 6100 pageProtec 6100
General fault handling
The manual says that when the 6100 detects a fault in any of the critical operating paths it shows it on the front panel display and the internal buzzer pulses slowly. The General Fault indicator is illuminated and is…
View on the Protec 6100 pageProtec 6100
Repeat Panel Fault
The manual says a fault has been detected on a repeat panel connected to the 6100, or the wiring to the repeat panel is faulty. The General Fault indicator is illuminated accompanied by the Repeat Fault indicator.
View on the Protec 6100 pageProtec 6100
Supply Fault
The manual says a fault has been detected in the power supply of the 6100. This may be because the local mains supply has failed, or because the internal stand-by batteries or circuitry are faulty. The General Fault…
View on the Protec 6100 pageProtec 6100
System Faults
The manual says the 6100 performs regular self tests to ensure the software is working correctly. If a fault is detected in software operation a System Fault is declared. It is a latching fault and can only be cleared…
View on the Protec 6100 pageProtec 6100
Zone Faults (indicators)
The manual says the 6100 displays any faults in the first 16 zones on the multifunction zone indicators, and all zone faults are also displayed on the LCD. The General Fault indicator is illuminated with the relevant…
View on the Protec 6100 pageProtec 6100
Fire link Fault (monitored fire link path)
The manual says a fault has been detected on the monitored fire link path. This may be a wiring fault or a fire link interface fault. The connection to the fire station link is no longer reliable, and expert advice…
View on the Protec 6100 pageProtec 6100
ALARM FAULT
A fault has been detected with an alarm output device on the loop, or a fault has been detected on one or both of the conventional alarm outputs.
View on the Protec 6100 page