Fault codes by panel
Search fault records across 49 panels. Each record is labelled with its review status and, where one is cited, the source document and page it comes from.
Searches 608 records across 49 panels — 573 of them source-verified. Signed in, your dashboard fault search covers only the fully source-verified records, on any plan.
Want to test yourself? Try the free daily fault challenge.
3 partial matches for “Apollo Fire Detectors manuals”
Nothing matched every word, so these match some of them. Check the record and panel before relying on it.
We do not hold published fault records for Apollo Fire Detectors, so these are not Apollo Fire Detectors records.
Fike Safety Technology CIE-A-200
Device faults during initialisation
Per the manual, if the system detects a device fault or fire activation during initialisation, initialisation does not fail at that point. Beyond certain limits initialisation will fail and the various fault or fire…
View on the Fike Safety Technology CIE-A-200 pageHochiki HFP AP-1AS/2AS
Loop open circuit or short circuit (how the panel responds)
Per the manual, power is driven from the LOOP OUT terminals and returned to the LOOP IN terminals, where it is monitored for loop continuity. If the loop is open circuit (a cable fault, or a short circuit isolator…
View on the Hochiki HFP AP-1AS/2AS pageHaes Systems Esprit Apollo Addressable
System fault: extension LED board
On the optional extension LED board, a continuous System Fault LED with the General Fault LED pulsing means the extension LED board is halted. The fault relay is active, and fire alarms can still be detected and…
View on the Haes Systems Esprit Apollo Addressable page