Fault records by panel

Yellow EARTH FAULT indicator, flashing: the manual says an earth fault has been detected where a path exists from the circuit wiring to earth. Remove circuits one at a time to discover which one, and then rectify.

Yellow FAULT indicator, continuous: the manual says the control panel is in the fault state and other indicators will show the origin. The indication can also be confirmed from the message in the panel information…

Yellow FIRE OUTPUT indicator, flashing: the manual says a fault condition is present on a monitored relay circuit. Continuous means a device or an action associated with the monitored relay circuit has been disabled.

Yellow POWER FAULT indicator, continuous: the manual says a battery fault has been detected, and to check the batteries and the in-line battery fuse.

Yellow POWER FAULT indicator, flashing: the manual says a mains supply fault has been detected, and to check for a 230 V AC supply on the incoming AC terminals.

Yellow SOUNDER indicator, flashing: the manual says a fault condition is present on a monitored sounder circuit. Continuous means a device or an action associated with the monitored sounder circuits has been disabled.

Yellow SYSTEM FAULT indicator, continuous: the manual says it indicates the presence of a processor or a checksum error. To clear it, power the system down, reprogram all settings and test the system. During a system…

Yellow SYSTEM FAULT indicator, flashing: the manual says this LED is also illuminated if the write protect / write enable switch is left on while the system is not in the engineer menu. In access levels 1 and 2 a system…

Yellow ZONE indicator, flashing: the manual says a fault condition is present on one of the zones or on a device connected to that zone. Continuous means a device or an action associated with a zone has been disabled.